Uberturbine-Style Forged Wheels for Tesla Model 3 & Model Y – 18"/19" | Set of 4

Bring a bold Uberturbine-inspired look to your Tesla with a fully forged, directional wheel set designed for everyday strength, precise fitment and an OEM+ stance.

• 18×8.5J ET35 for compatible Tesla Model 3 configurations
• 19×9.5J ET35 for compatible Tesla Model 3 and Model Y configurations
• 850 kg maximum load rating per wheel
• Approximately 11.7 kg per 18-inch wheel and 12.5 kg per 19-inch wheel
• 5×114.3 bolt pattern and 64.1 mm center bore
• 60° conical lug seat
• Set of four: two left-direction and two right-direction wheels

Fitment checkpoint: Designed for the listed RWD and Long Range configurations at factory or OEM+ ride height. Performance models, vehicles with an additional hub step, lowered suspension, aftermarket brakes, spacers or modified alignment require confirmation before ordering.

Directional Uberturbine-Inspired Design

The sculpted turbine-style spokes create a strong sense of motion while complementing the clean body lines of the Tesla Model 3 and Model Y.

This set uses dedicated left- and right-hand wheels so the turbine pattern flows consistently on both sides of the vehicle. Install every wheel according to its marked left/right orientation.

Fully Forged 6061-T6 Construction

Manufactured from forged 6061-T6 aluminum, these wheels combine EV-suitable load capacity with a distinctive full-face design. Each wheel has a maximum rated load of 850 kg when used on a compatible vehicle with correctly rated tires.

• 18×8.5J: approximately 11.7 kg per wheel
• 19×9.5J: approximately 12.5 kg per wheel

Choose the Correct Size

18×8.5J – Model 3

This version retains the common factory 18-inch diameter and width while its ET35 offset positions the wheel slightly farther outward than a typical ET40 factory Model 3 wheel.

• Recommended tire: 235/45R18
• Practical tire availability and everyday ride comfort
• Factory-size tires may be reused only when their condition, load rating, speed rating and approved rim-width range are suitable

19×9.5J – Model 3

A wider, performance-oriented setup for increased tire support and a more assertive stance.

• Recommended tire: 265/35R19
• Overall diameter remains close to the common factory 235/40R19 setup
• Selected 235/40R19 tires may fit a 9.5J wheel only when the tire manufacturer lists that rim width as approved
• A 235/40R19 tire on a 9.5J wheel may provide less rim-edge protection

19×9.5J – Model Y

Designed to retain the practical factory-style 19-inch tire size while creating a more outward OEM+ stance.

• Recommended tire: 255/45R19
• Approximately 10 mm farther outward than a typical 19×9.5J ET45 factory wheel
• Compatible OEM-size tires may be reused only when their condition and specifications remain suitable

Honest Weight Comparison

The 19×9.5J wheel weighs approximately 12.5 kg. Compared with selected Model Y factory 19-inch wheels reported at approximately 13.4–13.6 kg, it may reduce wheel-only mass by approximately:

• 0.9–1.1 kg per wheel
• 3.6–4.4 kg per set

For Model 3, the primary benefits of the 19×9.5J version are its wider fitment, directional styling and 850 kg load rating. It is not represented as lighter than every factory Model 3 wheel.

OEM wheel weights vary by model year, supplier and finish. Comparisons exclude tires, TPMS sensors, center caps and aero covers.

Vehicle Fitment

Performance models: Brake-caliper clearance and any additional hub-step clearance must be verified for this exact wheel before ordering. This page does not guarantee Performance fitment. Vehicles with aftermarket brakes, suspension changes, spacers or modified alignment also require an individual clearance check.

Not compatible with Tesla Model S, Model X or Cybertruck.

Technical Specifications

Tire Recommendations

Always select tires with a load index and speed rating that meet or exceed the requirements on the vehicle's Tire and Loading Information label. Actual tire dimensions can vary between manufacturers.

Finish Options

• Glossy Black
• Matte Black
• Satin Grey

Satin Grey wheels use a black center-cap color because a matching Satin Grey cap is not currently available. Confirm center-cap and valve-stem inclusion before ordering if these items are important to your installation.

What's Included

• Four forged wheels
• Two left-direction and two right-direction wheels

Tires and TPMS sensors are not included.

Installation Notes

• Professional installation is recommended.
• Install each directional wheel on its marked side.
• Use compatible 60° conical-seat wheel fasteners and confirm lug-hole/tool clearance.
• Follow Tesla's specified wheel-fastener torque.
• Recheck fastener torque after the initial driving period.
• Lowered or modified vehicles require separate tire-to-fender, suspension and brake-clearance verification.

Customization

Custom colors and wheel-surface text are available by request. Contact service@tesery.com before ordering to confirm feasibility, pricing and production time.

Customized wheels are final sale except in cases of verified manufacturing defect, shipping damage or rights provided by applicable law.